Diamond Drilling In Concrete
 Work carried out using the Track Saw

FORMING DOORWAYS

As part of an office redevelopment in Manchester city centre, we were required to remove a number of single and double doorways, throughout the building.

These had to be removed in manageable pieces and then placed into a skip on the ground floor. The client brief also stiplutated that there couldn't be ANY overcutting of the opening as it could weaken the structure. Our solution so as to eliminate this was a 150mm diameter hole drilled at each end of where each cut was to be made (the blade then runs into the hole as opposed to the remaining structure)

All the work was carried out in accordance with a tightly planned schedule and was completed on time. 

 

Back to Case Studies

 
 Follow Access Drilling